Small fluidized bed drier-

Glass-minimum handling capacity of 100g- air is introduced into electric heater by blower (backup)，and entered into the fluidized bed through the air distribution plate. The material is pre-added from the top of the fluidized bed, and by adjusting the air volume, the material can be kept fluidized under the action of hot air, and the fluidization drying of the material can be realized.

Small fluidized bed drier Product profile

Small fluidized bed drier, laboratory fluidized bed dryer, laboratory boiling dryer are refer to this machine,it occupies less than 0.5 square meters, compared with the production equipment, it has less investment, lower cost and smaller equipment volume, Small area, small handling capacity, flexible operation. It meets the needs of scientific research and enterprise new product development and is suitable for universities, research institutes, enterprises engaged in new product research and development, especially expensive products experimental research and production. It can be widely used in medicine, biology, chemical, food, dyes, light industry and pesticide and other fields of powder and granular materials drying.

Small fluidized bed drier Product characteristics:

1, The fluidized bed is a circular structure with quick opening connection, easy disassembly and assembly, convenient cleaning, and accord with GMP code.

2, Can monitor the temperature of inlet, material and outlet air in fluidized bed;

3,The air volume of blower can be adjusted according to the characteristics of treated materials to achieve the ideal fluidization effect (frequency conversion control)

4, Dust removal with coated cloth bag (1 um) is adopted to ensure clean operating environment and convenient recovery and treatment of expensive materials.

Small fluidized bed drier Work principle:

The air is introduced into the electric heater by the blower. The material is pre-added by the top of the fluidized bed through the air distribution plate. By adjusting the inlet air volume, the material can be kept in fluidized state under the action of hot air, and the fluidization drying of the material can be realized. Dry tail gas is removed by bag dust collector and emptied.

Technical parameters:

Model No.: QFN-LHC-1500

Outer size: 700mm x 700mm x 1600mm

Heating mode: electric heating

Electric heating power: 6kW

Air inlet temperature: 200℃(adjustable, automatic control)

Processing volume: 500g/ batch

Drying time: 10-60min/ batch

Total weight of equipment: 100kg

Control mode: PLC

 上海乔枫经过多年的发展，不断的引进日本和德国的技术，克服了国内很多物料很难喷雾干燥的难题，比如颗粒很难均匀的难题，平均颗粒15微米以下颗粒很难实现的难题，平均颗粒在100微米以上的难题，颗粒实心圆的难题等。